====== Command:RESET (~) ======

^Shortcut  |~   | 
^Format  |RESET|

This command causes the controller to do a software reset.  A software reset re-initializes all variables back to their pre-assigned values and initializes all positions to 0.  Saved settings and system flags are preserved across resets, but not saved positions.  Therefore commands like [[commands:SETHOME|HM]] require a power cycle instead of a reset.  To re-initialize settings to default, use ''SS X'' before the reset (see documentation for the [[commands:saveset|SS command]]; note that on Tiger ''SS'' is a card-addressed command).

== Example ==
	
<asi> $ RESET
:A</asi>


--> Additional Notes about usage on Tiger ^
RESET is usually a '' Broadcast command'' but can be used as a ''Card-Addressed Command'' as well. When addressed to a specific card, it resets that card and then the Comm card (required to communicate with the reset card) without affecting other installed cards.
<--


{{tag>commands tiger ms2000}}