Differences

This shows you the differences between two versions of the page.

--- array [2019/04/18 19:33] – external edit 127.0.0.1
+++ array [2024/01/30 19:46] (current) – [ARRAY MODULE for ARRAY Scanning] brandon
@@ Line 4: / Line 4: @@
 <WRAP center round important 60%>
-Note: ARRAY module doesn't account for HOME button , ZERO button and[[commands:zero| ZERO command]] properly. Avoid using them when relying on ARRAY module to move the stage.
+Note: ARRAY module doesn't account for HOME button, ZERO button and[[commands:zero| ZERO command]] properly. Avoid using them when relying on ARRAY module to move the stage.
 </WRAP>
@@ Line 17: / Line 17: @@
 The location of the first position in the array, the 1,1 location, is specified by the [[commands:ahome|AHOME command]].  The default value for the coordinates of the 1,1 position are 0.0, 0.0 in the controller’s coordinate system.  You need not even use the ''AHOME'' command if the stage is manually moved to the location of the 1,1 array position and then the ZERO button is used to set the coordinate zero to that location.  The ''AHOME'' command, with out arguments, will establish the current stage position as the 1,1 array position.  Hence, if you move the stage manually to the 1,1 location and issue ''AH'',  the stage will maintain its original coordinate system yet have the correct offsets for the fixed array moves.
+Whether a raster or serpentine pattern is used is set using the ''[[commands:scan|SCAN F]]'' setting (default is serpentine).
 ==== Controlling Moves to Array Positions ====

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181