User Tools

Site Tools


autofocus_termination

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
autofocus_termination [2016/03/24 16:27]
vik created
autofocus_termination [2016/10/04 15:13] (current)
Line 6: Line 6:
 ===== 1) BNC Tee and BNC terminator ===== ===== 1) BNC Tee and BNC terminator =====
    
-[{{ :​documentation:​af_tn1.png?​direct |Figure 1: BNC Tee and BNC terminator}}]+[{{ af_tn1.png?​direct |Figure 1: BNC Tee and BNC terminator}}]
  
 For temporary experimentation a BNC Tee and a BNC 50Ω / 75Ω terminator could be used to see if the systems performance improves. ​ For temporary experimentation a BNC Tee and a BNC 50Ω / 75Ω terminator could be used to see if the systems performance improves. ​
Line 16: Line 16:
   * Replace R26 10KΩ resistor with 75Ω   * Replace R26 10KΩ resistor with 75Ω
    
-[{{ :​documentation:​af_tn2.png?​direct |Figure 2: Positions of the SMD resistors on the Autofocus board}}]+[{{ af_tn2.png?​direct |Figure 2: Positions of the SMD resistors on the Autofocus board}}]
  
  
autofocus_termination.txt · Last modified: 2016/10/04 15:13 (external edit)