User Tools

Site Tools


commands:afmove

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
commands:afmove [2019/04/18 23:32]
127.0.0.1 external edit
commands:afmove [2019/07/29 23:50] (current)
vik
Line 4: Line 4:
  
 ^Shortcut ​ |AM |  ^Shortcut ​ |AM | 
-^Format ​ |AFMOVE [X=0 or 1]|+^Format ​ |AFMOVE [X=0 or 1] [Y=0 or 1]|
 ^Units ​   |interger code (0 or 1)| ^Units ​   |interger code (0 or 1)|
 ^Remembered |Using SS Z | ^Remembered |Using SS Z |
Line 13: Line 13:
  
 ^Shortcut ​ |AM |  ^Shortcut ​ |AM | 
-^Format ​ |[Addr#​]AFMOVE [X=0 or 1]|+^Format ​ |[Addr#​]AFMOVE [X=0 or 1] [Y=0 or 1]|
 ^Units ​   |interger code (0 or 1)| ^Units ​   |interger code (0 or 1)|
 ^Type |Card-Addressed| ^Type |Card-Addressed|
Line 26: Line 26:
  
 A mode command that influences subsequent commanded moves. ​ If ''​X=1'',​ then upon completion of a commanded XY move ([[commands:​move|MOVE]] and [[commands:​movrel|MOVREL]]),​ for example, <wrap cmd> MOVE X=123 Y=456 </​wrap>,​ a multi-axis controller will then automatically initiate an auto-focus. A mode command that influences subsequent commanded moves. ​ If ''​X=1'',​ then upon completion of a commanded XY move ([[commands:​move|MOVE]] and [[commands:​movrel|MOVREL]]),​ for example, <wrap cmd> MOVE X=123 Y=456 </​wrap>,​ a multi-axis controller will then automatically initiate an auto-focus.
 +
 +''​Y=1''​ enables the [[:​filter_and_turret_changer#​safe_turret|SAFE_TURRET]] module. ''​Y=0''​ disables it.
  
 == Response == == Response ==
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
commands/afmove.1555630376.txt.gz · Last modified: 2019/04/18 23:32 by 127.0.0.1