User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
commands:arm [2016/05/18 19:59]
vik created
commands:arm [2019/04/18 23:32] (current)
Line 1: Line 1:
 +====== Command:ARM ======
 +^Shortcut ​ |ARM| 
 +^Format ​ |ARM  [X] [Y=log] [Z]|
 +^Remembered |Using SS Z |
 +Without arguments, this command establishes the **ARM_COMMAND_RCVD** event. ​ Typically it is used to start the SEQUENCER via a single serial command.
 +**ARM X** re-initializes the SEQUENCER. ​ This command is useful if the RESET conditions are changed or if the sequencer is hung in a non-IDLE state.
 +**ARM Y=1** turns on or ARM Y=0 turns off the serial log file creation.
 +**ARM Z** forces a “sequence stop” condition. ​ The sequencer is re-initialized;​ all blocks with ALWAYS start conditions are placed in the IDLE state, and all stage motion is halted.
 +{{tag>​commands ms2000 sequencer}}
commands/arm.txt · Last modified: 2019/04/18 23:32 (external edit)