User Tools

Site Tools


commands:lockrg

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
commands:lockrg [2019/04/18 23:33]
127.0.0.1 external edit
commands:lockrg [2019/05/29 12:14] (current)
jon
Line 1: Line 1:
 ====== Command:​LOCKRG (LR) ====== ====== Command:​LOCKRG (LR) ======
  
-This commands function changes if the system has a Phototrack module or CRISP module. ​+This commands function changes if the system has a Phototrack module or CRISP/​SERVOLOCK_TTL ​module. ​
  
 --> On CRISP systems# --> On CRISP systems#
Line 28: Line 28:
  
 The T parameter controls the gain multiplier or loop gain also set by KADC command. ​ This is for convenience only, both have the identical effect. ​ In this case the axis character does not need to be specified. The T parameter controls the gain multiplier or loop gain also set by KADC command. ​ This is for convenience only, both have the identical effect. ​ In this case the axis character does not need to be specified.
 +
 +<--
 +
 +--> With SERVOLOCK_TTL#​
 +
 +--> Tiger Syntax#
 +^Shortcut |LR|
 +^Format ​ |[Addr#]LR [Z=lock_range] ​ |
 +^Type |Card-Addressed|
 +^Remembered |Using [Addr#]SS Z |
 +
 +<--
 +
 +The SERVOLOCK_TTL module uses the ''​LOCKRG Z''​ command to set the maximum excursion. ​ If CRISP is also present then the same setting is shared by both modules.
 +  ​
 +The Z parameter controls the maximum excursion of the stage from the position where it was initially locked before the system generates an error condition and unlocks. ​ The value lock_range is in units of millimeters. ​ The default value is 1.0 mm.  ​
 +
  
 <-- <--
Line 46: Line 63:
  
 <-- <--
-{{tag>​commands tiger ms2000 crisp phototrack}}+{{tag>​commands tiger ms2000 crisp phototrack ​servolock_ttl}}
commands/lockrg.txt · Last modified: 2019/05/29 12:14 by jon