User Tools

Site Tools


commands:rbmode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
commands:rbmode [2019/05/17 00:56]
jon
commands:rbmode [2019/05/25 21:14] (current)
jon
Line 42: Line 42:
 == axis_byte == == axis_byte ==
  
-1-7: Binary value determines which axes are commanded to move; the same axes’ positions are reported using ''​IN0_mode=5''​. The ordering of axes is generally the order on the card/​controller,​ with the first axis getting the LSB.  The axis ordering can also be ascertained using the ''​Z2B''​ command; axis number 0 gets the LSB, axis 1 gets the 2s position in the binary value, and so on.  ​+1-7: Binary value determines which axes are commanded to move; the same axes’ positions are reported using ''​IN0_mode=5''​. The ordering of axes is generally the order on the card/​controller,​ with the first axis getting the LSB.  The axis ordering can also be ascertained using the ''​Z2B''​ command; axis number 0 gets the LSB, axis 1 gets the 2s position in the binary value, and so on.  ​The axis_byte setting also applies to the ''​SERVOLOCK_TTL''​ module and TTL-triggered moves.
  
 == buffer_pointer == == buffer_pointer ==
Line 63: Line 63:
 > CAUTION: If you are using TTL mode 12 (see the [[commands:​ttl|TTL command]]), the values entered into the ring buffer using the [[commands:​load|LOAD command]] represent RELATIVE coordinates,​ not ABSOLUTE coordinates. You must drive the stage to the appropriate starting position before triggering a ring buffer sequence. > CAUTION: If you are using TTL mode 12 (see the [[commands:​ttl|TTL command]]), the values entered into the ring buffer using the [[commands:​load|LOAD command]] represent RELATIVE coordinates,​ not ABSOLUTE coordinates. You must drive the stage to the appropriate starting position before triggering a ring buffer sequence.
  
-{{tag>​commands tiger ms2000 ringbuffer array }}+{{tag>​commands tiger ms2000 ringbuffer array servolock_ttl}}
commands/rbmode.txt · Last modified: 2019/05/25 21:14 by jon