User Tools

Site Tools


commands:vb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
commands:vb [2019/12/06 18:23]
gary
commands:vb [2019/12/06 20:10] (current)
gary [Command:VB]
Line 25: Line 25:
 CMD_code can be specified on firmware with the NO_CHANGE_SETTINGS module included in the firmware. ​ If you need this function and do not have the module in the firmware, contact ASI.  This feature allows some commands to be "​turned off" for modification of settings by host software. CMD_code can be specified on firmware with the NO_CHANGE_SETTINGS module included in the firmware. ​ If you need this function and do not have the module in the firmware, contact ASI.  This feature allows some commands to be "​turned off" for modification of settings by host software.
  
-Serial commands are enumerated according to the following table:+Serial commands are enumerated according to the following table witha command number CMD:
  
 +^|AA, AALIGN |0||PC, PCROS   ​|20||MC,​ MOTCTRL |40|MA, MAINTAIN |60|LCD ​        |80|
 +^|AC, ACCEL  |1||RM, RBMODE ​ |21||PD, PEDAL   ​|41|Z2B ​         |61|WRDAC ​      |81|
 +^|B, BACKLASH|2||RB,​ RDSBYTE |22||AF, AFOCUS ​ |42|AM, AFMOVE ​  ​|62|AR,​ ARRAY   |82|
 +^|BE, BENABLE|3||RS,​ RDSTAT ​ |23||WT, WAIT    |43|BU, BUILD    |63|AH, AHOME   |83|
 +^|CD, CDATE  |4||~, RESET    |24||AZ, AZERO   ​|44|LL,​ LLADR    |64|AIJ ​        |84|
 +^|C, CNTS    |5||SL, SETLOW ​ |25||SS, SAVESET |45|AL, AFLIM     ​|65|AFINFO ​       |85|
 +^|CR, CREST, |6||SU, SETUP   ​|26||SN,​ SCAN    |46|RU, RUNAWAY ​  ​|66|EXTRA ​        |86|
 +^|D, DACK    |7||S, SPEED    |27||LK, LOCK    |47|UM ​           |67|PZ ​           |87|
 +^|E, ERROR   ​|8||@,​ SPIN     ​|28||UN,​ UNITS   ​|48|ZS ​           |68|PZC ​          |88|
 +^|\, HALT    |9||/, STATUS ​  ​|29||MT,​ MTIME   ​|49|HM,​ SETHOME ​  ​|69|PZINFO ​       |89|
 +^|TTL        |10||V, VERSION |30||VE, VECTOR ​ |50|OS ​           |70|ARM ​          |90|
 +^|H, HERE    |11||W, WHERE   ​|31||KA ​         |51|CCA, CUSTOMA ​ |71|BCA,​BCUSTOM ​  |95|
 +^|!, HOME    |12||N, WHO     ​|32||RDADC ​      ​|52|CCB,​ CUSTOMB ​ |72|LED ​          |96|
 +^|J, JOYSTICK|13||Z,​ ZERO    |33||NR, SCANR   ​|53|TEST ​         |73|SECURE ​       |97|
 +^|KD, KDP    |14||JS, JSSPD  |34||NV, SCANV   ​|54|EP,​ EPOL      |74|MM, MULTIMV ​ | 98|
 +^|KI, KIP    |15||ES, ENSYNC |35||UL, UNLOCK ​ |55|RT, RTIME     ​|75|TSLOCK ​       |99|
 +^|KP, KPP    |16||I, INFO    |36||RL, RELOCK ​ |56|AFADJ ​        ​|76|SAA ​          |100|
 +^|KV, KVP    |17||SP, SAVEPOS|37||LR LOCKRG ​  ​|57|AFC,​ AFCALIB ​ |77|SAM ​          |101|
 +^|M, MOVE    |18||LD, LOAD   ​|38||SB,​ STOPBITS|58|AFHOLD ​       |78|SAP ​          |102|
 +^|R, MOVREL ​ |19||DU, DUMP   ​|39||VB,​ VBMODE ​ |59|SI ​           |79|SAF ​          |103|
 +^|      ​| ||  ​   |  ||     |  | |  |SAO           |104|
 +To disable the write function of a command, use VB T=(1000+CMD).  ​
 +
 +**Example**
 +<wrap cmd> VB T=1027 </​wrap> ​ will disable changing the SPEED command. ​
 +
 +The command is explicitly enabled by using VB T=CMD.
 +
 +**Example**
 +<wrap cmd> VB T=27 </​wrap> ​ will allow the SPEED command to work again. ​
  
  
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
commands/vb.txt · Last modified: 2019/12/06 20:10 by gary