User Tools

Site Tools


commands:z2b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
commands:z2b [2016/09/07 22:04]
asiadmin ↷ Links adapted because of a move operation
commands:z2b [2019/04/18 23:33] (current)
Line 1: Line 1:
 +====== Command:Z2B ======
  
 +--> MS2000 or RM2000 syntax#
 +
 +^Format ​ |Z2B axis=[new axis letter ascii code]… ​  |
 +^Units ​   |ASCII code|
 +^Remembered |Using SS Z |
 +^Firmware Required |v8.6d+|
 +
 +<--
 +
 +--> Tiger syntax# ​
 +
 +^Format ​ |Z2B axis=[new axis letter ascii code]… ​  |
 +^Units ​   |ASCII code|
 +^Type    |Axis-Specific ​ |
 +^Remembered |Using [addr#]SS Z |
 +
 +<--
 +
 +Allows the user to change the axis name for a motor axis.  The ''​current_axis_letter''​ must be one of the motor axes names listed with the [[commands:​build|BU X command]]. ​ The ''​new_axis_letter_ascii_code''​ must be the decimal ASCII code for the desired axis name for letters between upper case ''​A(65)''​ and''​ Z(90)''​. ​  For the change to take effect, the new setting must be saved to flash memory using [[commands:​saveset|SS Z]], followed by a hardware reset. ​ The new axis name will remain in effect unless default settings are restored to the controller. ​
 +
 +If the Z2B value of an axis is queried (e.g. ''​Z2B Y?''​),​ the axis’ index on the card is returned (e.g. <wrap reply> :A Y=1 </​wrap>​ for the 2nd axis on the card).
 +
 +== Reply ==
 +
 +If there are no errors, a positive response of <wrap reply> :A </​wrap>​ will be returned from the controller.
 +== Example ==
 +
 +<asi> $ Z2B Z=66 
 +:​A</​asi>​
 +change to **B** axis name
 +<asi> $ 2SS Z 
 +:​A</​asi>​
 +Required to save new name setting to flash. 2 because Z is on card#2
 +
 +
 +{{tag>​commands tiger ms2000}}
commands/z2b.txt · Last modified: 2019/04/18 23:33 (external edit)