User Tools

Site Tools


crisp_ninja

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
crisp_ninja [2017/12/22 20:15]
vik
crisp_ninja [2019/04/18 23:34] (current)
Line 1: Line 1:
 +====== CRISP Ninja (Standalone CRISP GUI) ======
 +
 +CRISP Ninja is an UI to interact with CRISP module in Tiger/​TG-1000 and MS-2000 system. It can be downloaded from [[https://​www.dropbox.com/​sh/​7bwf28b9s36its8/​AABAXcqD5F21_pI2aKZ03zAwa?​dl=0|here]] ​
 +
 +===== Using CRISP Ninja =====
 +
 +{{::​crisp_ninja.jpg?​direct |}}
 +
 +1. RS232 Serial Comm port TG-1000 is connected to.
 +
 +2. Baud Rate, always 115200 for TG-1000 systems.
 +
 +3. Poll, is the polling delay. Leave it at 200ms. Too frequent polling may lead to system freezing.
 +
 +4. Card Address of the CRISP axis. (leave blank for MS2000)
 +
 +5. CRISP Axis character
 +
 +6. If option 8 is check, this is the location where the logs are saved.
 +
 +7. Start button, application starts up and connects with TG-1000
 +
 +8. When check saves the log of commands sent and replies received.
 +
 +9. Puts the CRISP in idle state
 +
 +10. Calibrates the Log amp
 +
 +11. Puts the CRISP in Dither mode
 +
 +12. Auto Adjusts the CRISP Gain
 +
 +13. CRISP focus LOCK
 +
 +14. CRISP focus UNLOCK
 +
 +15. Status of the CRISP module, queried every X ms, X set by #3
 +
 +16. Position of the CISP axis, units 1/10 microns
 +
 +17. CRISP SNR
 +
 +18. Type and send serial commands.Application will automatically append Card Address( from #4) in front of the command.
 +
 +{{tag>​crisp software tiger manual}}
  
crisp_ninja.txt ยท Last modified: 2019/04/18 23:34 (external edit)