User Tools

Site Tools


crisp_ninja

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
crisp_ninja [2019/05/15 19:31]
vik
crisp_ninja [2019/09/07 00:09] (current)
vik
Line 1: Line 1:
 ====== CRISP Ninja (Standalone CRISP GUI) ====== ====== CRISP Ninja (Standalone CRISP GUI) ======
  
-CRISP Ninja is an UI to interact with CRISP module in Tiger/​TG-1000 and MS-2000 system. It can be downloaded from [[http://​www.asiimaging.com/​downloads/​software/​crisp_ninja_march_2019.zip|here]] +CRISP Ninja is an UI to interact with CRISP module in Tiger/​TG-1000 and MS-2000 system. It can be downloaded from here    
 +  * [[http://​www.asiimaging.com/​downloads/​software/​CRISP_NINJA_090919.zip|Latest Build from 6th September 2019]]  
 +  * [[http://​www.asiimaging.com/​downloads/​software/​crisp_ninja_march_2019.zip|Previous build from March 2019]]
  
 ===== Using CRISP Ninja ===== ===== Using CRISP Ninja =====
Line 11: Line 13:
 2. Baud Rate, always 115200 for TG-1000 systems. 2. Baud Rate, always 115200 for TG-1000 systems.
  
-3. Poll, is the polling delay. Leave it at 200ms. Too frequent polling may lead to system freezing.+3. Poll, is the polling delay. Leave it at 120ms. Too frequent polling may lead to system freezing.
  
 4. Card Address of the CRISP axis. (leave blank for MS2000) 4. Card Address of the CRISP axis. (leave blank for MS2000)
Line 19: Line 21:
 6. If option 8 is check, this is the location where the logs are saved. 6. If option 8 is check, this is the location where the logs are saved.
  
-7. Start button, application starts up and connects with TG-1000+7. Start button, ​the application starts up and connects with TG-1000. Click again to stop.
  
 8. When check saves the log of commands sent and replies received. 8. When check saves the log of commands sent and replies received.
Line 37: Line 39:
 15. Status of the CRISP module, queried every X ms, X set by #3 15. Status of the CRISP module, queried every X ms, X set by #3
  
-16. Position of the CISP axis, units 1/10 microns+16. Position of the CRISP axis, units <del>1/10</​del> ​microns 
 + 
 +17. CRISP <​del>​SNR</​del>​ AGC 
 + 
 +18. Type and send serial commands. <​del>​The application will automatically append Card Address( from #4) in front of the command.</​del>​ 
 + 
 +19. Queries the controller for CRISP address and axis character automatically. 
 + 
 +20. Sets CRISP IR led intensity 0 to 100 
 + 
 +21. Current Objective NA. Effects dither distance. 
 + 
 +22. CRISP error signal averaging.  
 + 
 +23. Loop Gain, makes the crisp more or less responsive.  
 + 
 +24. Lock range, crisp enters fail state if it moved beyond this range. Helpful in preventing crashes. 
 + 
 +26. Set Offset, zeros the error signal, CRISP will attempt to keep current focus.  
 + 
 +27. Clears the reply text box of all previous entries. 
 + 
 +28. Open the default browser and brings it to this screen. ​
  
-17. CRISP SNR 
  
-18. Type and send serial commands.Application will automatically append Card Address( from #4) in front of the command. 
  
 {{tag>​crisp software tiger manual}} {{tag>​crisp software tiger manual}}
  
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
crisp_ninja.1557948689.txt.gz · Last modified: 2019/05/15 19:31 by vik