User Tools

Site Tools


ftp_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ftp_setup [2019/07/08 14:53]
jon change image sizes
ftp_setup [2019/07/08 14:58] (current)
jon [Mount XY Stage] added note to check for proud screws
Line 68: Line 68:
  
 3. After the screws are tightened, it is important to: 3. After the screws are tightened, it is important to:
 +  - Check that the screw tops are flush with or slightly below the surface of the stage bottom plate. If any protrude (i.e. are "​sitting proud"​) then the screw head is larger than it should be and moving the stage may scratch the middle plate. ​ Please contact ASI for new screws.
   - Check that the stage is level with the table; remove or loosen the screws if realignment is necessary.   - Check that the stage is level with the table; remove or loosen the screws if realignment is necessary.
   - Verify both stilts are plugged in.    - Verify both stilts are plugged in. 
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
ftp_setup.txt ยท Last modified: 2019/07/08 14:58 by jon