User Tools

Site Tools


fw1000_optical_encoder_adjustment

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
fw1000_optical_encoder_adjustment [2016/09/07 15:29]
asiadmin ↷ Links adapted because of a move operation
fw1000_optical_encoder_adjustment [2016/10/03 04:21] (current)
Line 16: Line 16:
 Step 3: Remove the filter wheel body from the housing with a 3/32” Allen wrench. Don’t remove the button head screws entirely as they will hold the lower felt washers in place when the unit is removed. Step 3: Remove the filter wheel body from the housing with a 3/32” Allen wrench. Don’t remove the button head screws entirely as they will hold the lower felt washers in place when the unit is removed.
  
-[{{ :​documentation:​fw_optical_encoders_4.jpg?​direct&​300 |Click to Enlarge}}]+[{{ fw_optical_encoders_4.jpg?​direct&​300 |Click to Enlarge}}]
  
 Step 4: Locate and mark the position of the filter wheel Optical encoder disk with a pencil next to its opening. Next, rotate the wheel manually until the .050” set screw is visible from the opening. ​ Step 4: Locate and mark the position of the filter wheel Optical encoder disk with a pencil next to its opening. Next, rotate the wheel manually until the .050” set screw is visible from the opening. ​
fw1000_optical_encoder_adjustment.txt · Last modified: 2016/10/03 04:21 (external edit)