User Tools

Site Tools


installing_insert

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

installing_insert [2016/10/04 22:13]
installing_insert [2019/04/18 23:34] (current)
Line 1: Line 1:
 +====== Installing ASI Slide Inserts Into The ASI Stage ======
  
 +The easiest way to install the ASI slide insert into the stage is to slide the insert in from the right, towards the spring clips, as shown in figures 1 through 3 below.
 +
 +<WRAP center round info 60%>
 +Note: on FTP system , Please insure that power is on to the ASI controller when installing the inserts, this will prevent the LS-100 units from losing position
 +</​WRAP>​
 +
 +
 +
 +[{{ insert_install_1_.jpg?​direct&​300 |Figure 1.  Slide the insert from the side of the stage that does not have the spring clips.}}]
 +
 +[{{ insert_install_5_.jpg?​direct&​300 |Figure 2.  Slide the insert so that it is pressed against both the back and front guides. ​ In this manner the front spring clip is engaged first and the side spring clip engaged last.}}]
 +
 +[{{ insert_install_4_.jpg?​direct&​300 |Figure 3.  When the insert engages the spring clips, press down with one hand while continuing to slide the insert into place with the other hand.}}]
 +
 +[{{ insert_install_2_.jpg?​direct&​300 |Figure 4:  If you try to use the corner of the insert to compress both of the spring clips at once, it will be difficult to install the inserts.}}]
 +
 +[{{ insert_install_3_.jpg?​direct&​300 |Figures 5:  If you try to use the corner of the insert to compress both of the spring clips at once, it will be difficult to install the inserts.}}]
 +
 +
 +{{tag>​xystage common}}