User Tools

Site Tools


joystick_connector_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
joystick_connector_check [2016/09/07 15:29]
joystick_connector_check [2019/04/18 23:34] (current)
Line 1: Line 1:
 +====== Joystick Connector Check ======
  
 +If you have a controller with a Joystick , and you get
 +
 +<wrap cmd> No JS  X:0 \\
 +No JS Y:0 </​wrap>​
 +
 +On serial out . Chances are the Joystick connector might have come undone during shipping. You can check if the connector this secure by opening the controller lid. 
 +
 +The Lid can be removed by unscrewing 6 screws , marked in the images below. ​
 +
 +{{ jc_1.jpg?​direct&​300 |}} 
 + 
 +{{ jc_2.jpg?​direct&​300 |}}
 +
 +The Screws can be unscrewed with a Star or Philips screw driver.
 +
 +{{ jc_3.jpg?​direct&​300 |}} 
 +
 +{{ jc_4.jpg?​direct&​300 |}} 
 +
 +{{ jc_5.jpg?​direct&​300 |}} 
 +
 +The Joystick connector is shown in the picture above. Press on it to make sure if its secure. ​
 +
 +Power the controller up and check if the joystick is responsive. If not contact ASI .
 +
 +{{tag>​joystick ms2000 tech_note}}
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181