User Tools

Site Tools


mippi_kit

MPPI Kit

End of pipette holder has jaws for holding glass pipette. Do not over tighten end piece that tightens the jaws down or the pipette will break.
In order to get a good seal the pipette glass must go through the o-ring that is in the 2nd part of the pipette holder. The 2nd part of the pipette holder is tightened to compress the o-ring to make a seal around the glass pipette.

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
mippi_kit.txt · Last modified: 2019/04/18 23:34 (external edit)