User Tools

Site Tools


ms2000_cable_connections

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
ms2000_cable_connections [2016/09/07 15:25]
asiadmin ↷ Page moved from documentation:ms2000_cable_connections to ms2000_cable_connections
ms2000_cable_connections [2016/10/04 15:13] (current)
Line 4: Line 4:
 This procedure gives pictorial instructions on how to connect nearly all of the cables to your MS-2000 controller. (The USB and Serial-Out cables are not covered here.) ​ Please note that, depending upon what options you have selected when purchasing your unit, some of the connections mentioned may not be available on the unit that you received. This procedure gives pictorial instructions on how to connect nearly all of the cables to your MS-2000 controller. (The USB and Serial-Out cables are not covered here.) ​ Please note that, depending upon what options you have selected when purchasing your unit, some of the connections mentioned may not be available on the unit that you received.
  
-[{{ :​documentation:​ms2k_conn_2_.jpg?​direct&​300 |Figure 1. Back of MS-2000 controller with all options available}}]+[{{ ms2k_conn_2_.jpg?​direct&​300 |Figure 1. Back of MS-2000 controller with all options available}}]
  
 ===== MS2000 and RM2000 Case Variations ===== ===== MS2000 and RM2000 Case Variations =====
  
-[{{ :​documentation:​case_1.jpg?​direct&​300 |Oldest case: Pre 2008 ; Click to Enlarge}}]+[{{ case_1.jpg?​direct&​300 |Oldest case: Pre 2008 ; Click to Enlarge}}]
  
-[{{ :​documentation:​case_2.jpg?​direct&​300 |Encoder Rev Cases; Click to Enlarge}}]+[{{ case_2.jpg?​direct&​300 |Encoder Rev Cases; Click to Enlarge}}]
  
-[{{ :​documentation:​case_3.jpg?​direct&​300 |Latest Cases; Click to Enlarge}}]+[{{ case_3.jpg?​direct&​300 |Latest Cases; Click to Enlarge}}]
  
-[{{ :​documentation:​case_4.jpg?​direct&​300 |Zeiss Build Case; Click to Enlarge}}]+[{{ case_4.jpg?​direct&​300 |Zeiss Build Case; Click to Enlarge}}]
  
-[{{ :​documentation:​case_5.jpg?​direct&​300 |RM2000: Rack Mount Controller; Click to Enlarge}}]+[{{ case_5.jpg?​direct&​300 |RM2000: Rack Mount Controller; Click to Enlarge}}]
  
 ===== Connecting XY Stage Cables: Figures 2 through 8: ===== ===== Connecting XY Stage Cables: Figures 2 through 8: =====
  
-[{{ :​documentation:​ms2k_conn_4_.jpg?​direct&​300 |Figure 2. XY Stage connectors on stage}}]+[{{ ms2k_conn_4_.jpg?​direct&​300 |Figure 2. XY Stage connectors on stage}}]
    
-[{{ :​documentation:​ms2k_conn_3_.jpg?​direct&​300 |Figure 3. XY Stage cable, stage end.}}]+[{{ ms2k_conn_3_.jpg?​direct&​300 |Figure 3. XY Stage cable, stage end.}}]
  
-[{{ :​documentation:​ms2k_conn_6_.jpg?​direct&​300 |Figure 4. X-axis cable connects to bottom stage plug.  }}]+[{{ ms2k_conn_6_.jpg?​direct&​300 |Figure 4. X-axis cable connects to bottom stage plug.  }}]
  
-[{{ :​documentation:​ms2k_conn_7_.jpg?​direct&​300 |Figure 5. Y-axis cable connects to top stage plug}}]+[{{ ms2k_conn_7_.jpg?​direct&​300 |Figure 5. Y-axis cable connects to top stage plug}}]
  
-[{{ :​documentation:​ms2k_conn_5_.jpg?​direct&​300 |Figure 6. XY Stage cable, controller end label}}]+[{{ ms2k_conn_5_.jpg?​direct&​300 |Figure 6. XY Stage cable, controller end label}}]
  
-{{ :​documentation:​ms2k_conn_8_.jpg?​direct&​300 |}}+{{ ms2k_conn_8_.jpg?​direct&​300 |}}
  
  
-[{{ :​documentation:​ms2k_conn_10_.jpg?​direct&​300 |Figures 7 XY Stage cable plugged into controller}}]+[{{ ms2k_conn_10_.jpg?​direct&​300 |Figures 7 XY Stage cable plugged into controller}}]
  
-[{{ :​documentation:​ms2k_conn_9_.jpg?​direct&​300 |Figures 8. XY Stage cable plugged into controller}}]+[{{ ms2k_conn_9_.jpg?​direct&​300 |Figures 8. XY Stage cable plugged into controller}}]
  
  
 ===== Connecting XY Stage Linear encoders: Figures 9 through 18 ===== ===== Connecting XY Stage Linear encoders: Figures 9 through 18 =====
  
-[{{ :​documentation:​ms2k_conn_11_.jpg?​direct&​300 |Figure 9. XY Linear Encoder Cables and the back of the MS-2000 controller.}}]+[{{ ms2k_conn_11_.jpg?​direct&​300 |Figure 9. XY Linear Encoder Cables and the back of the MS-2000 controller.}}]
  
-[{{ :​documentation:​ms2k_conn_13_.jpg?​direct&​300 |Figure 10. Y Axis Linear Encoder plugged into controller. (bottom plug).}}]+[{{ ms2k_conn_13_.jpg?​direct&​300 |Figure 10. Y Axis Linear Encoder plugged into controller. (bottom plug).}}]
  
-[{{ :​documentation:​ms2k_conn_12_.jpg?​direct&​300 |Figure 11. Y Axis Linear Encoder plugged into controller. (bottom plug).}}]+[{{ ms2k_conn_12_.jpg?​direct&​300 |Figure 11. Y Axis Linear Encoder plugged into controller. (bottom plug).}}]
  
-[{{ :​documentation:​ms2k_conn_15_.jpg?​direct&​300 |Figure 12. X-axis Linear Encoder plugged into controller. (top plug).}}]+[{{ ms2k_conn_15_.jpg?​direct&​300 |Figure 12. X-axis Linear Encoder plugged into controller. (top plug).}}]
  
-[{{ :​documentation:​ms2k_conn_14_.jpg?​direct&​300 |Figure 13. X-axis Linear Encoder plugged into controller. (top plug).}}]+[{{ ms2k_conn_14_.jpg?​direct&​300 |Figure 13. X-axis Linear Encoder plugged into controller. (top plug).}}]
  
 ===== Connecting Z-Axis Drive: Figure 14 though 16 ===== ===== Connecting Z-Axis Drive: Figure 14 though 16 =====
  
-[{{ :​documentation:​ms2k_conn_16_.jpg?​direct&​300 |Figure 14. Z-Drive and Z-Drive cable connected}}]+[{{ ms2k_conn_16_.jpg?​direct&​300 |Figure 14. Z-Drive and Z-Drive cable connected}}]
  
-[{{ :​documentation:​ms2k_conn_17_.jpg?​direct&​300 |Figure 15. Z-Drive and Z-Drive cable connected}}]+[{{ ms2k_conn_17_.jpg?​direct&​300 |Figure 15. Z-Drive and Z-Drive cable connected}}]
  
-[{{ :​documentation:​ms2k_conn_18_.jpg?​direct&​300 |Figure 16. Z-Drive cable connected at controller end.}}]+[{{ ms2k_conn_18_.jpg?​direct&​300 |Figure 16. Z-Drive cable connected at controller end.}}]
  
 ===== Connecting Z-Axis Linear Encoder: Figure 17 through 18 ===== ===== Connecting Z-Axis Linear Encoder: Figure 17 through 18 =====
  
-[{{ :​documentation:​ms2k_conn_19_.jpg?​direct&​300 |Figure 17. Z-Axis Linear Encoder, read head and plug end.}}]+[{{ ms2k_conn_19_.jpg?​direct&​300 |Figure 17. Z-Axis Linear Encoder, read head and plug end.}}]
  
-[{{ :​documentation:​ms2k_conn_20_.jpg?​direct&​300 |Figure 18. Z-Axis Linear Encoder plugged into controller}}]+[{{ ms2k_conn_20_.jpg?​direct&​300 |Figure 18. Z-Axis Linear Encoder plugged into controller}}]
  
 ===== Connecting RS232 Serial Cable: Figure 19 through 22 ===== ===== Connecting RS232 Serial Cable: Figure 19 through 22 =====
  
-[{{ :​documentation:​ms2k_conn_23_.jpg?​direct&​300 |Figure 19 Serial-In Plug on MS-2000}}]+[{{ ms2k_conn_23_.jpg?​direct&​300 |Figure 19 Serial-In Plug on MS-2000}}]
  
-[{{ :​documentation:​ms2k_conn_25_.jpg?​direct&​300 |Figure 20 Serial-connected on to MS-2000}}]+[{{ ms2k_conn_25_.jpg?​direct&​300 |Figure 20 Serial-connected on to MS-2000}}]
  
-[{{ :​documentation:​ms2k_conn_21_.jpg?​direct&​300 |Figure 21. Typical PC }}]+[{{ ms2k_conn_21_.jpg?​direct&​300 |Figure 21. Typical PC }}]
  
-[{{ :​documentation:​ms2k_conn_24_.jpg?​direct&​300 |Figure 22. Serial cable connected}}]+[{{ ms2k_conn_24_.jpg?​direct&​300 |Figure 22. Serial cable connected}}]
  
 ===== Connecting Power: Figure 23 through 24 ===== ===== Connecting Power: Figure 23 through 24 =====
  
-[{{ :​documentation:​ms2k_conn_26_.jpg?​direct&​300 |Figure 23. Power Connector on MS2000}}]+[{{ ms2k_conn_26_.jpg?​direct&​300 |Figure 23. Power Connector on MS2000}}]
  
-[{{ :​documentation:​ms2k_conn_25_.jpg?​direct&​300 |Figure 24. Power Plug connected to MS2000}}]+[{{ ms2k_conn_25_.jpg?​direct&​300 |Figure 24. Power Plug connected to MS2000}}]
  
 ===== Connecting Piezo Stage to MS2000 controller ===== ===== Connecting Piezo Stage to MS2000 controller =====
Line 84: Line 84:
 The Piezo stage connector is a male DB9 connector with 2 pins removed. ​ The Piezo stage connector is a male DB9 connector with 2 pins removed. ​
  
-{{ :​documentation:​piezo_conn1.jpg?​direct&​300 |}}+{{ piezo_conn1.jpg?​direct&​300 |}}
  
 The Corresponding connector on the controller is a Female DB9 connector with two pins permanently plugged. This prevents connecting serial cable or crisp accidently to the piezo connector, Doing so will damage these devices as the Piezo connector carries very high voltage. ​ The Corresponding connector on the controller is a Female DB9 connector with two pins permanently plugged. This prevents connecting serial cable or crisp accidently to the piezo connector, Doing so will damage these devices as the Piezo connector carries very high voltage. ​
  
-{{ :​documentation:​piezo_conn2.jpg?​direct&​300 |}}+{{ piezo_conn2.jpg?​direct&​300 |}}
  
 Apart from the DB9, the controller also has 2 BNC connector **PZ Sensor Out** and **EXT IN** . These are optional connectors and don't need to be connected for regular operation. ​ Apart from the DB9, the controller also has 2 BNC connector **PZ Sensor Out** and **EXT IN** . These are optional connectors and don't need to be connected for regular operation. ​
  
-{{ :​documentation:​adept_ms2000_conn.jpg?​direct&​300 |}}+{{ adept_ms2000_conn.jpg?​direct&​300 |}}
  
 ===== Connecting Piezo and TTL BNCs:Figure 25 through 26 ===== ===== Connecting Piezo and TTL BNCs:Figure 25 through 26 =====
    
-[{{ :​documentation:​ms2k_conn_28_.jpg?​direct&​300 |Figure 25 Piezo Out Plug on MS-2000}}]+[{{ ms2k_conn_28_.jpg?​direct&​300 |Figure 25 Piezo Out Plug on MS-2000}}]
  
-[{{ :​documentation:​ms2k_conn_27_.jpg?​direct&​300 |Figure 26 TTL-In Plug on MS-2000}}]+[{{ ms2k_conn_27_.jpg?​direct&​300 |Figure 26 TTL-In Plug on MS-2000}}]
  
  
  
-[{{ :​documentation:​ms2k_conn_1_.jpg?​direct&​300 |Figure 27. MS-2000 Power Supply can now be connected to an AC power source.}}]+[{{ ms2k_conn_1_.jpg?​direct&​300 |Figure 27. MS-2000 Power Supply can now be connected to an AC power source.}}]
  
  
 ===== Connecting to LED Illuminator when 4-Pin Connector is Present ===== ===== Connecting to LED Illuminator when 4-Pin Connector is Present =====
  
-[{{ :​documentation:​mim_ramm_46_.jpg?​direct&​300 |LED Illuminator}}]+[{{ mim_ramm_46_.jpg?​direct&​300 |LED Illuminator}}]
  
 The LED illuminator connects to the MS2000, MFC2000, RM2000 and TG-1000 with the cable shown below. ​ The LED illuminator connects to the MS2000, MFC2000, RM2000 and TG-1000 with the cable shown below. ​
  
-[{{ :​documentation:​led_conn_3.jpg?​direct&​300 |LED cable}}]+[{{ led_conn_3.jpg?​direct&​300 |LED cable}}]
  
 The Cable has a mini-usb end that plugs into the Illuminator itself. Then the 4-Pin HiRose connector plugs into the Controller. Location of the HIRose connector is shown below. The Cable has a mini-usb end that plugs into the Illuminator itself. Then the 4-Pin HiRose connector plugs into the Controller. Location of the HIRose connector is shown below.
  
-[{{ :​documentation:​led_conn_1.jpg?​direct&​300 |Location of 4-Pin HiRose Connector and TTL out on MS2000 and MFC2000}}]+[{{ led_conn_1.jpg?​direct&​300 |Location of 4-Pin HiRose Connector and TTL out on MS2000 and MFC2000}}]
  
-[{{ :​documentation:​led_conn_2.jpg?​direct&​300 |Location of 4-Pin HiRose Connector and TTL out on RM2000}}]+[{{ led_conn_2.jpg?​direct&​300 |Location of 4-Pin HiRose Connector and TTL out on RM2000}}]
  
 ===== Connecting to LED Illuminator when 4-Pin Connector is Absent ===== ===== Connecting to LED Illuminator when 4-Pin Connector is Absent =====
Line 123: Line 123:
 However not all controllers come with the 4-Pin HiRose connector installed. However not all controllers come with the 4-Pin HiRose connector installed.
  
-[{{ :​documentation:​led_conn_6.jpg?​direct&​300 |Controller with no HiRose Connector. However TTL Out is always present. }}]+[{{ led_conn_6.jpg?​direct&​300 |Controller with no HiRose Connector. However TTL Out is always present. }}]
  
 In that case, ASI will supply this Y cable(shown below). The HiRose end plugs into the LED cable'​s HiRose end. Then the BNC plugs into the TTL Out , and the wall-wart to the wall wart.  In that case, ASI will supply this Y cable(shown below). The HiRose end plugs into the LED cable'​s HiRose end. Then the BNC plugs into the TTL Out , and the wall-wart to the wall wart. 
  
-[{{ :​documentation:​led_conn_5.jpg?​direct&​300 |Work Around Y cable}}]+[{{ led_conn_5.jpg?​direct&​300 |Work Around Y cable}}]
  
-[{{ :​documentation:​led_conn_4.jpg?​direct&​300 |5V to 9V wall-wart}}]+[{{ led_conn_4.jpg?​direct&​300 |5V to 9V wall-wart}}]
  
 Please note , the controller needs a LED firmware module to operate the LED. If the LED illuminator was ordered later as an upgrade , controller may not have the necessary firmware. To Check , Issue serial command [[commands:​build|BU X]] . If the controller replies with ''​LED DIMMER''​ then the controller has the necessary firmware needed. If not, contact ASI with your controller'​s serial number and request for it.  Please note , the controller needs a LED firmware module to operate the LED. If the LED illuminator was ordered later as an upgrade , controller may not have the necessary firmware. To Check , Issue serial command [[commands:​build|BU X]] . If the controller replies with ''​LED DIMMER''​ then the controller has the necessary firmware needed. If not, contact ASI with your controller'​s serial number and request for it. 
ms2000_cable_connections.txt · Last modified: 2016/10/04 15:13 (external edit)