User Tools

Site Tools


removing_red_shipping_bracket

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
removing_red_shipping_bracket [2016/10/03 19:17]
51.255.65.34 ↷ Links adapted because of a move operation
removing_red_shipping_bracket [2019/04/18 23:34] (current)
Line 1: Line 1:
 +====== TN150: Removing the Red Shipping Bracket from the RAMM ======
 +
 +== Tools Needed: ==
 +  * 5mm and 6mm driver or Allen wrench
 +
 +{{ red_1.jpg?​direct&​300 |}}
 +
 +
 +
 +STEP 1: Locate the Red shipping bracket on the RAMM. It is attached between the Arch and the Linear Positioner, LS-50, and should be obvious.
 +
 +{{ red_2.jpg?​direct&​300 |}}
 +
 +STEP 2: Locate the six cap screws that retain the bracket. ​
 +
 +{{ red_3.jpg?​direct&​300 |}}
 +
 +STEP 3: The bottom four screws are removed with the 5mm Allen wrench.
 +
 +{{ red_4.jpg?​direct&​300 |}}
 +
 +STEP 4: The top two screws are removed with the 6mm Allen wrench.
 +
 +{{ red_5.jpg?​direct&​300 |}}
 +
 +STEP 5: Keep the bracket with the systems shipping containers in case the system must be shipped again.
 +
 +{{ red_6.jpg?​direct&​300 |}}
 +
 +If you have any problems removing or installing the Red Shipping Bracket on the RAMM contact a ASI technician for further instructions on the procedure so that you don’t get frustrated and the system doesn’t get damaged. Thanks.
 +
 +{{tag>​RAMM tech_note}}
  
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
removing_red_shipping_bracket.txt · Last modified: 2019/04/18 23:34 (external edit)