User Tools

Site Tools


safety_instructions

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
safety_instructions [2017/03/05 11:30]
melissa spelling and grammar
safety_instructions [2019/04/18 23:35] (current)
Line 1: Line 1:
 +====== Safety Instructions ======
  
 +<WRAP center round info 60%>
 +Please read these instructions carefully; they include important information about the installation,​ usage and maintenance of this product.
 +</​WRAP>​
 +
 +  * Always make sure that you are connecting to proper voltage, and that the line voltage you are connecting to is not higher then the rating of the installed fuse.
 +  * This product is intended for indoor use only! To prevent risk of fire or shock, do not expose equipment to rain or moisture.
 +  * The unit must be installed in a location with adequate ventilation. ​  Be sure the bottom and back ventilation slots are not blocked.
 +  * Always disconnect from power source before servicing, or replacing fuse and be sure to replace with appropriate size fuse rating according to the product label.
 +  * Use the provided power cord.   ​Replacing the supplied cord with an inadequate cord can result in a fire or shock hazard.
 +  * Maximum ambient temperature (Ta) is 104ºF ​ (40ºC). ​ Do not operate fixture at temperatures higher than this.
 +  * In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. ​  ​Repairs carried out by untrained people can lead to damage or malfunction. ​  
 +  * No user serviceable parts are in the unit.   ​Opening the unit may expose shock hazards. ​ Please contact ASI for any needed repairs.
 +  * Make sure the power cord is never crimped or damaged.
 +  * Never disconnect the power cord by pulling or tugging on the cord.
 +
 +<WRAP center round info 60%>
 +Please note that ESD to individual cards can cause the card(s) to shut down or reboot. ​  In the event of an ESD shut down or reboot, simply turn the controller off and then back on.
 +</​WRAP>​
 +
 +
 +====== Symbols On Controller ======
 +
 +<WRAP center round box 60%>
 +{{::​caution.jpg |}} Caution: Read the instruction manual before operating
 +</​WRAP>​
 +
 +<WRAP center round box 60%>
 +{{::​shock.jpg |}} Shock Hazards: Do not open case, shock hazards inside
 +</​WRAP>​
 +
 +<WRAP center round box 60%>
 +{{::on.jpg |}} ON:  Instrument (supply) is ON
 +</​WRAP>​
 +
 +<WRAP center round box 60%>
 +{{::off.jpg |}} OFF: Instrument (supply) is OFF
 +</​WRAP>​
 +
 +{{tag>​safety}}
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181