Differences

This shows you the differences between two versions of the page.

--- stablestage [2021/05/19 15:45] – created brandon
+++ stablestage [2021/09/23 17:15] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+======= ASI Stable Stage =======
 The ''ASI Stable Stage'' plugin can measure and correct thermal drift.
 Requirements: ''Micro-Manager 2.0''
-Optional: ''CRISP'' or ''Autofocus3''
+Optional: ''CRISP'' or ''Autofocus3'' (Note: ''Autofocus3'' integration coming soon)
+Send an email to ''brandon@asiimaging.com'' if you're interested in the plugin.
+==== Controls ====
+{{:stablestage_maintab.png?direct|}}
+**Main Tab:**
+**1) Run Forever:** Check this box if you would like to run the test indefinitely in ''Drift Measurement'' or ''Stage Stabilization'' mode.
+**2) Test Length:** If you're not running the test indefinitely, then you can specify the number of minutes you would like the test to run.
+**3) Drift Error:** The amount of drift in microns required for ''Stage Stabilization'' to attempt to correct the XY stage position.
+**4) Max Move:** The maximum amount that ''Stage Stabilization'' will move the stage in microns.
+**5) Phase Correlation:** Which phase correlation algorithm to use for ''Stage Stabilization''.
+**6) Autofocus Device:** Which autofocus device to use for ''Stage Stabilization''. Select ''None'' if no device available.
+**7) XY Moves:** Invert the computed shift values in either the X or Y axes.
+**8) XY Gain:** A multiplier to adjust the computed shift value.
+{{:stablestage_cameratab.png?direct|}}
+**Camera Tab:**
+**1) Show Images:** Check this box to show the phase correlation comparison images while running the test.
+**2) Keep Shutter Open:** Keep the cameras shutter open during the test.
+**3) Capture Delay:** The number of milliseconds to delay between each phase correlation comparison test.
+**4) Downsample Factor:** The amount to downscale the camera images, this can increase performance significantly.
+**5) Apply Gaussian Blur:** Apply a blur filter to the captured images, this setting is recommended.
+**6) Blur Amount:** The amount of blur to apply to the images, the standard deviation of the Gaussian filter.
+**7) Use Background Subtraction:** Check this box if you want to use background subtraction.
+**8) Snap Background Image:** Snaps an image to use as the background subtraction image.
+**9) View Background Image:** Opens a frame to view the captured background subtraction image.
+{{:stablestage_datatab.png?direct|}}
+**Data Tab:**
+**1) Save Directory:** The directory to save the images into.
+**2) File Name:** The file name prefix to save the logging data.
+**3) Logging:** Check these boxes to log information about XY moves and Z moves.
+**4) Save Images:** Check this box to save images into the save directory.
+**5) Save Type:** The criteria for saving images, the spinners below control the options for save types.
+**6) Save Every N Images:** This is always save the first image, and then every N images afterward.
+**7) Move Threshold:** Save the test image a move command above a certain threshold is sent to the controller.
+**8) Correlation Threshold:** Save the test image if the correlation coefficient of the comparison is below this threshold.
+**9) Limit Save Data:** The maximum amount of image data to save in a test run in gigabytes.
+{{tag> software auto_track}}

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181