User Tools

Site Tools


tech_note_changing_piezo_drive_card_fast_slow_compensation

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tech_note_changing_piezo_drive_card_fast_slow_compensation [2018/09/10 14:55]
vik
tech_note_changing_piezo_drive_card_fast_slow_compensation [2018/09/10 15:00] (current)
vik [Identifying Your ADEPT Card]
Line 35: Line 35:
 If your controller'​s reply has <wrap reply> ADEPT Rev 1 </​wrap>​ , you are in luck, your controller has an ADEPT Rev M or above card , you will be able to change the compensation with just serial commands. ​ If your controller'​s reply has <wrap reply> ADEPT Rev 1 </​wrap>​ , you are in luck, your controller has an ADEPT Rev M or above card , you will be able to change the compensation with just serial commands. ​
  
-Issues the serial commands ​"PZ Z-" ​to put the Drive card in "Slow mode" and "PZ Z+" ​to put the card in fast mode. If you are satisfied with the performance , you can save the setting to non volatile memory by issuing the serial command ​"SS Z" +Issues the serial commands ​[[commands:​pz|PZ Z-]] to put the Drive card in "Slow mode" and  ​[[commands:​pz|PZ Z+]] to put the card in fast mode. If you are satisfied with the performance , you can save the setting to non volatile memory by issuing the serial command ​[[commands:​saveset|SS Z]]. If your don't have a preferred serial terminal program and you are on a MS2000 controller, try [[http://​www.asiimaging.com/​support/​downloads/​asi-console/​|ASI Console]].
-  * If your controller is MS2000 , refer to "ADEPT User Manual"​ for more details on the command.  +
-  * If your controller is TG-1000/​Tiger , refer to "Tiger ADEPT user manual"​ instead. +
-  * If your don't have a preferred serial terminal program and you are on a MS2000 controller, try ASI Console . Available here http://​www.asiimaging.com/​support/​downloads/​asi-console/​+
  
 If your ''​PZINFO''​ reply , instead has <wrap reply> ADEPT Rev 0 </​wrap>​ or anything like that at all , you have an older system. If it's a ADEPT Rev L2 card compensation can be changed by opening the controller and changing the jumper. If your ''​PZINFO''​ reply , instead has <wrap reply> ADEPT Rev 0 </​wrap>​ or anything like that at all , you have an older system. If it's a ADEPT Rev L2 card compensation can be changed by opening the controller and changing the jumper.
tech_note_changing_piezo_drive_card_fast_slow_compensation.txt · Last modified: 2018/09/10 15:00 by vik