User Tools

Site Tools


tggalvo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tggalvo [2019/09/04 21:32]
vik
tggalvo [2019/09/04 21:32] (current)
vik [TGDAC4 / TGGALVO (4 Channel DAC card)]
Line 11: Line 11:
 With the ''​GALVO_SPIM''​ firmware the card can replace a MicroMirror card(TGMM4). With the DAC outputs, it can connect to a 3rd party Scanner or Galvo amplifier. It presents as a Galvo to Micro-Manager and diSPIM plugin. The Voltage range can be adjusted with [[commands:​pm|Command:​PM]]. All other operation is similar to the [[micromirror|MicroMirror Drive Card]] With the ''​GALVO_SPIM''​ firmware the card can replace a MicroMirror card(TGMM4). With the DAC outputs, it can connect to a 3rd party Scanner or Galvo amplifier. It presents as a Galvo to Micro-Manager and diSPIM plugin. The Voltage range can be adjusted with [[commands:​pm|Command:​PM]]. All other operation is similar to the [[micromirror|MicroMirror Drive Card]]
  
-With the ''​PIEZO_DAC''​ firmware the card can replace a Piezo drive card (TGADEPT). With the DAC outputs, it can control a 3rd party piezo amplifier. It presents as a Piezo device to Micro-Manager and diSPIM plugin. The Voltage range can be adjusted with [[commands:​pm|Command:​PM]]. All other operation is similar to the [[piezo_manual|APiezo ​drive card]]+With the ''​PIEZO_DAC''​ firmware the card can replace a Piezo drive card (TGADEPT). With the DAC outputs, it can control a 3rd party piezo amplifier. It presents as a Piezo device to Micro-Manager and diSPIM plugin. The Voltage range can be adjusted with [[commands:​pm|Command:​PM]]. All other operation is similar to the [[piezo_manual|Piezo drive card]]
  
 With the ''​SIGNAL_DAC''​ firmware the card behaves like a Signal generator. User can set the output voltage directly in millivolts. It can generate periodic waveforms with [[singleaxis|Single-axis functions]] and arbitrary waveforms with [[ring_buffer|RING BUFFER Multi-Point Save/Move]] modules. It presents as a SignalIO device in Micro-Manager( Supported by Micro-Manager version 1.4.23 night builds 9/4/2019 and after). Unlike the other firmware, the voltage range in this firmware is adjusted [[commands:​pr|Command:​PR]]. With the ''​SIGNAL_DAC''​ firmware the card behaves like a Signal generator. User can set the output voltage directly in millivolts. It can generate periodic waveforms with [[singleaxis|Single-axis functions]] and arbitrary waveforms with [[ring_buffer|RING BUFFER Multi-Point Save/Move]] modules. It presents as a SignalIO device in Micro-Manager( Supported by Micro-Manager version 1.4.23 night builds 9/4/2019 and after). Unlike the other firmware, the voltage range in this firmware is adjusted [[commands:​pr|Command:​PR]].
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
tggalvo.txt ยท Last modified: 2019/09/04 21:32 by vik