User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tuning_40_tpi_stage [2016/03/29 23:18]
vik created
tuning_40_tpi_stage [2019/04/18 23:35] (current)
Line 1: Line 1:
 +====== Tuning Your 40 TPI Lead screw Stage for Small Moves ======
 +Dear User, your stage has been optimized for small move sizes (100nm-10nm). Various physical and firmware settings were modified to accomplish this. To achieve 10nm moves we found the following settings helped. ​
 +<asi> $ Kp x=250 y=250
 +$ Ki x=5 y=5
 +$ Ma x=2 y=2</​asi>​
 +While these settings will help for submicron moves, they may cause instability and jitter. If you notice this feel free to revert one or more of these settings back to their defaults. ​
 +First, <wrap cmd> Ma x=0 y=0 </​wrap>​
 +And if the instability and jitter persists ​
 +<asi> $ Kp x=75 y=75
 +$ Ki x=1 y=1</​asi> ​
 +If you have further questions please contact us at support[at]asiimging[dot]com or thru 1-541-461-8181
 +{{tag>​tech_note ms2000 tiger xystage common}}
Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
tuning_40_tpi_stage.txt · Last modified: 2019/04/18 23:35 (external edit)