User Tools

Site Tools


xystage_limits

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
xystage_limits [2016/10/04 15:13]
127.0.0.1 external edit
xystage_limits [2018/06/22 09:28] (current)
vik
Line 31: Line 31:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage #
  
 [{{ ft1.png?​direct&​300 |Figure 1a:  Loosen the setscrew so that you can move the Y-axis lower limit located at the rear right of stage. ​ Do not over-tighten.}}] [{{ ft1.png?​direct&​300 |Figure 1a:  Loosen the setscrew so that you can move the Y-axis lower limit located at the rear right of stage. ​ Do not over-tighten.}}]
Line 152: Line 152:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage#
  
 [{{ ft5.png?​direct&​300 |Figure 3b:  After loosening the setscrew as shown in figure 1a, move the limit until the “L” appears in the Y axis display as shown in figure 3c.  Do not over-tighten.}}] [{{ ft5.png?​direct&​300 |Figure 3b:  After loosening the setscrew as shown in figure 1a, move the limit until the “L” appears in the Y axis display as shown in figure 3c.  Do not over-tighten.}}]
Line 219: Line 219:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage#
  
 [{{ ft6.png?​direct&​300 |Figure 4b:  After loosening the setscrew as shown in figure 1b, move the limit until the “U” appears in the Y axis display as shown in figure 4c.  Do not over-tighten.}}] [{{ ft6.png?​direct&​300 |Figure 4b:  After loosening the setscrew as shown in figure 1b, move the limit until the “U” appears in the Y axis display as shown in figure 4c.  Do not over-tighten.}}]
Line 280: Line 280:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage#
  
 [{{ ft8.png?​direct&​300 |Figure 5b:  After loosening the setscrew as shown in figure 2a, move the limit until the “L” appears in the X-axis display as shown in figure 6c.  Do not over-tighten.}}] [{{ ft8.png?​direct&​300 |Figure 5b:  After loosening the setscrew as shown in figure 2a, move the limit until the “L” appears in the X-axis display as shown in figure 6c.  Do not over-tighten.}}]
Line 348: Line 348:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage#
  
 {{ ft9.png?​direct&​300 |Figure 6b:  After loosening setscrew as shown in figure 2b, move the limit until the “U” appears in the X-axis display as shown in figure 7c.  Do not over-tighten.}} {{ ft9.png?​direct&​300 |Figure 6b:  After loosening setscrew as shown in figure 2b, move the limit until the “U” appears in the X-axis display as shown in figure 7c.  Do not over-tighten.}}
Line 412: Line 412:
 <-- <--
  
---> FlatTop Inverted Stage#+--> ​MS2500 or FlatTop Inverted Stage#
  
 [{{ ft7.png?​direct&​300 |Figure 7}}] [{{ ft7.png?​direct&​300 |Figure 7}}]
xystage_limits.txt · Last modified: 2018/06/22 09:28 by vik