User Tools

Site Tools


zeiss_axioexaminer_ftp_install

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
zeiss_axioexaminer_ftp_install [2016/11/07 23:53]
vik created
zeiss_axioexaminer_ftp_install [2019/04/18 23:35] (current)
Line 1: Line 1:
 +====== Zeiss AxioExaminer FTP-2100 installation ======
 +
 +{{ ::​ae_ftp_01.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_02.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_03.jpg?​300 |}}
 +
 +Remove the top cover as shown & loosen the six screws noted with a 5 mm Allen wrench as shown.
 +
 +{{ ::​ae_ftp_04.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_05.jpg?​300 |}}
 +
 +Remove top of scope as shown & then used T25 wrench to remove four screws noted that secure factory spacer
 +
 +{{ ::​ae_ftp_06.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_07.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_08.jpg?​300 |}}
 +
 +Locate six screws & washers shown that attach spacer to microscope. ​ Drop them in to the six openings on the spacer block as shown. M6 x 35 mm
 +
 +{{ ::​ae_ftp_09.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_10.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_11.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_12.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_13.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_14.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_15.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_16.jpg?​300 |}}
 +
 +Align spacer block with top of microscope as shown above, then flip top of microscope & microscope as shown below.
 +
 +{{ ::​ae_ftp_17.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_18.jpg?​300 |}}
 +
 +Use original screws that secured short factory spacer & T25 wrench to secure longer spacer ​ onto top of microscope as shown in photos below.
 +
 +{{ ::​ae_ftp_19.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_20.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_21.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_22.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_23.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_24.jpg?​300 |}}
 +
 +Set top of microscope with Spacer installed on top of microscope body & use 5 mm Allen wrench to secure top of microscope & spacer to microscope body as shown below
 +
 +{{ ::​ae_ftp_25.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_26.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_27.jpg?​300 |}}
 +
 +Use T25 wrench to remove small dovetail and use 3 mm wrench to remove stops and install these on longer supplied dovetail as shown below
 +
 +{{ ::​ae_ftp_28.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_29.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_30.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_31.jpg?​300 |}}
 +
 +Use the original screws with fresh blue lock tight to attach the longer dovetail as shown. ​ Attach the bottom screws first & insure the longer dovetail is aligned parallel to the bottom dovetail; this can be done by using a straight edge
 +
 +As shown in the photos below remove the condenser assembly from the microscope body, and install the supplied cover in its place. ​ Install the condenser assembly onto the condenser bracket as shown and install the complete assembly onto the stage.
 +
 +{{ ::​ae_ftp_32.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_33.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_34.jpg?​300 |}}
 +
 +{{ ::​ae_ftp_35.jpg?​300 |}}
 +
 +
 +{{tag>​zeiss axioexaminer ftp manual}}
  
zeiss_axioexaminer_ftp_install.txt ยท Last modified: 2019/04/18 23:35 (external edit)