User Tools

Site Tools


zflock_module

ZF LOCK (FTP firmware) module Operation

Controllers with the ZFLOCK module let the user slave or un-slave an axes to another at runtime. When slaved, slave axis will mirror all moves and events that happen on master axis. This mode is enabled and disabled thru the serial command ZF or CLUTCH switch. ZF command also lets user change the designation of master and slave axis.

This firmware module is incomplete and has been superseded by the SLAVE_F_TO_Z firmware module.

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181
zflock_module.txt · Last modified: 2019/04/18 23:35 (external edit)