User Tools

Site Tools


zflock_module

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
zflock_module [2017/12/22 12:31]
jon
zflock_module [2017/12/22 12:33] (current)
jon
Line 3: Line 3:
 Controllers with the ''​ZFLOCK module''​ let the user slave or un-slave an axes to another at runtime. When slaved, slave axis will mirror all moves and events that happen on master axis. This mode is enabled and disabled thru the serial command ''​ZF''​ or ''​CLUTCH''​ switch. ''​ZF''​ command also lets user change the designation of master and slave axis. Controllers with the ''​ZFLOCK module''​ let the user slave or un-slave an axes to another at runtime. When slaved, slave axis will mirror all moves and events that happen on master axis. This mode is enabled and disabled thru the serial command ''​ZF''​ or ''​CLUTCH''​ switch. ''​ZF''​ command also lets user change the designation of master and slave axis.
  
-This firmware module is incomplete and has been superseded by the SLAVE_Z_TO_F ​firmware module.+This firmware module is incomplete and has been superseded by the SLAVE_F_TO_Z ​firmware module.
    
 {{tag>​tech_note zflock}} ​ {{tag>​tech_note zflock}} ​
zflock_module.txt · Last modified: 2017/12/22 12:33 by jon