Differences

This shows you the differences between two versions of the page.

--- matlab [2021/01/14 17:57] – jon
+++ matlab [2024/04/18 11:54] (current) – jon
@@ Line 1: / Line 1: @@
 ====== MATLAB ======
-We currently don't have any official support for MATLAB.
+ASI doesn't have any official support for MATLAB.  However you can use MATLAB by sending serial commands to ASI controllers.  See our [[command_quick_start|Quick Start on Serial Commands]] page.
-You can still use MATLAB by sending serial commands to our controllers.  See our [[command_quick_start|Quick Start on Serial Commands]] page.
 Here is a unofficial script to control ASI stages using an MS2000: https://www.mathworks.com/matlabcentral/fileexchange/19428-asi-microscope-stage-mover.
-You can utilize Micro-Manager through Matlab.  Micro-Manager provides a uniform API to control many microscopy devices and ASI's controllers are very well supported.  See https://micro-manager.org/wiki/Matlab_Configuration.
+ASI officially supports Micro-Manager which can be accessed via Matlab.  Micro-Manager provides a uniform API to control many microscopy devices.  See https://micro-manager.org/wiki/Matlab_Configuration for information.  (Note that ASI doesn't officially support the Matlab interface, just Micro-Manager itself).

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181